I began growing my own plants from seeds several years ago when I became frustrated with the selection of plants that were available at the greenhouses. Over the years I have had good success with starting a wide variety of herbs and vegetables. The following is the process that I use.
Seed Starting Supplies:
– Seed starting tray with cover and tray cells (if cared for, these can be reused for several years)
– Organic seed starting mix
– Standard fluorescent shop lights with some way to adjust the height above the seed starting trays.
– Last but not least the seeds, the following is the list of the seeds that I started this year.
The Seeds for 2012:
– Heirloom Tomatoes: Red Zebra, Cherokee Purple, Hillbilly, Gold Medal, Mortgage Lifter, Amish Paste, Large Cherry, and Cherry Roma
-Peppers: Bull Nose and Fish
-Herbs: Dill, Cilantro, Summer Savory, Genovese Basil, Sweet Basil, Large Leaf Italian Basil, English Thyme, and Greek Oregano.
The first step in my process is to fill a tub with seed starting mix (the approximate amount I need to fill the cells) then I add water to the mix until the mix is really saturated.
The next step in the process is to fill all of the tray cells with the seed starting mix. I fill each cell about 3/4 full with the mix. Then I make plant markers to label what plant is growing in each cell. I put the plant markers in first so that I don’t forget what seeds were planted in each cell when I am all done.
Once all of the plant markers are in place, I begin placing a few seeds of the variety in each cell to ensure germination in each cell. After the seeds sprout, I will go through and thin out the seedlings in each cell. After all the seeds have been placed in the appropriate cells, I take some dry seed starting mix and cover up all the seeds so the seeds are the correct depth. Then I take a spray bottle filled with water and mist the top of all the cells.
The last step in the process is to cover the tray with the clear plastic lid and place it under the lights. I use a standard 4 bulb fluorescent shop light, with standard bulbs. I have used this light system for the last 5 years with great results. My light hangs from a simple stand that gives me the ability to adjust the height of the lights as the plants grow. I usually keep the light only a few inches above the seed trays to start.
I leave the clear plastic cover on until the first seeds start to germinate and push through the mix. Not all the seeds will germinate at the same time, so I make sure the cover is removed once the first seedlings push through. Once the cover is removed it is important to make sure that the seedlings are kept moist. I use a spray bottle filled with water to mist the seedlings.
I will keep you posted on the progress of my plants.